www.rfm.com e-mail: info@rfm.com page 1 of 5 ?2009-2011 by rf monolithics, inc. SF2136E - 2/10/11 electrical characteristics characteristic sym notes min typ max units center frequency f c 433.92 mhz 3 db bandwidth 5mhz insertion loss, 433.05 to 434.79 mhz il 2.0 3.3 db amplitude ripple, p-p, 433.05 to 434.79 mhz 0.3 1.5 attenuation referenced to 0 db: 389.0 to 392.0 mhz 42 54 411.0 to 414.0 mhz 40 50 454.0 to 457.0 mhz 40 51 475.0 to 478.5 mhz 42 52 863.0 to 870.0 mhz 41 35 source impedance z s 50 ? load impedance z l 50 ? case style sm3030-6 3.0 x 3.0 mm nominal footprint lid symbolization, y=year, ww=week, s=shift, dot=pin 1 indicator 682, ywws standard reel quantity reel size 7 inch 500 pieces/reel reel size 13 inch 3000 pieces/reel electrical connections connection terminals input 2 output 5 case ground all others sm3030-6 ? steep roll-off filter for 433.92 mhz unlicensed band no matching required for operation in 50 ? environment complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units input power level 10 dbm dc voltage on any non-ground terminal 3 v operating temperature range -40 to +85 c storage temperature range in tape and reel -40 to +85 c maximum soldering profile, 5 cycles/10 seconds maximum 265 c 433.92 mhz saw filter SF2136E 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 ? and measured with 50 ? network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depen dent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. the design, manufacturing process, and specifications of this filter are subject to change. 5. us and international patents may apply. 6. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. pb caution: electrostatic sensitive device. observe precautions for handling. notes:
www.rfm.com e-mail: info@rfm.com page 2 of 5 ?2009-2011 by rf monolithics, inc. SF2136E - 2/10/11 SF2136E frequency response plots ch1 s2 1 lo g 10 d b/ re f -4 0 d b c en ter 433 . 9 20 00 0 m h z s pan 1 00 . 000 0 00 m hz 15 oct 2 010 22:56:43 1 2 3 4 5 5 : -51 . 17 0 db 4 54 . 0 00 000 m hz ch1 markers 1 : -53 . 099 d b 38 9 . 000 m hz 2 : -52 . 868 d b 39 2 . 000 m hz 3 : -51 . 531 d b 41 1 . 000 m hz 4 : -48 . 401 d b 41 4 . 000 m hz sf2136 e
www.rfm.com e-mail: info@rfm.com page 3 of 5 ?2009-2011 by rf monolithics, inc. SF2136E - 2/10/11 ch1 s21 log 1 db/ ref -1.011 db center 433 . 920 00 0 m hz span 10 . 000 00 0 mhz c 15 oct 2 010 22:59:11 1 2 2 : - . 06770 db 1 . 740 000 mhz ref= 1 ch1 markers mean : -1 . 7339 db s . d ev : . 0 424 0 d b p-p : . 16 000 d b sf2136 e rippl e resp
www.rfm.com e-mail: info@rfm.com page 4 of 5 ?2009-2011 by rf monolithics, inc. SF2136E - 2/10/11 6-terminal ceramic surface-mount case 3.0 x 3.0 mm nominal footprint sm3030-6 case top view bottom view case and pcb footprint dimensions case materials dimension mm inches min nom max min nom max a 2.87 3.00 3.13 0.113 0.118 0.123 b 2.87 3.00 3.13 0.113 0.118 0.123 c 1.12 1.25 1.30 0.044 0.049 0.051 d 0.77 0.90 1.03 0.030 0.035 0.040 e 2.67 2.80 2.93 0.105 0.110 0.115 f 1.47 1.60 1.73 0.058 0.063 0.068 g 0.72 0.85 0.98 0.028 0.033 0.038 h 1.37 1.50 1.63 0.054 0.059 0.064 i 0.47 0.60 0.73 0.019 0.024 0.029 j 1.17 1.30 1.43 0.046 0.051 0.056 k 3.20 0.126 l 1.70 0.067 m 1.05 0.041 n 0.81 0.032 o 0.38 0.015 materials solder pad plating 0.3 to 1.0 m gold over 1.27 to 8.89 m nickel lid plating 2.0 to 3.0 m nickel body al 2 o 3 ceramic pb free pcb footprint top view 1 2 3 6 5 4 1 2 3 6 5 4 a bc d j ef gh i 682 ywws
www.rfm.com e-mail: info@rfm.com page 5 of 5 ?2009-2011 by rf monolithics, inc. SF2136E - 2/10/11 tape and reel specifications ?b? quantity per reel inches millimeters 7 178 500 13 330 3000 see detail "a" 1 3 . 0 2 0 . 2 2.0 12.0 1 0 0 r e f . " b " r e f . component orientation and dimensions carrier tape dimensions ao 3.35 mm bo 3.35 mm ko 1.40 mm pitch 8.0 mm w12.0 mm ro.3 (max.) ko section a-a 0.3 0.05 section b-b bo 2.0 4.0 ao pitch bb a r0.5 (max.) a 5 . 5 1 2 . 0 1 . 7 5 1.5 1.50 pin #1 user direction of feed
|
